本文主要介绍了zabbix进行数据库表分区的方法:在系统监控中,zabbix已经代替了nagios+cacti,zabbix以其良好的图形展示和高度自定义赢得了很多运维人员的喜爱。但是由于在工作中,zabbix跑的时间过长(我们公司跑了将近3年),web页面经常卡顿,监控数据有时很难插入数据库,且数据库队列经常性卡死,经过查看,发现mysql的数据量高达83G,急需瘦身,于是有了此文。 步骤:修改表结构: use zabbix; Alter table history_text drop primary key, add index (id), drop index history_text_2, add index history_text_2 (itemid, id); Alter table history_log drop primary key, add index (id), drop index history_log_2, add index history_log_2 (itemid, id)创建四大存储过程: DELIMITER $$ CREATE PROCEDURE `partition_create`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), PARTITIONNAME VARCHAR(64), CLOCK INT)BEGIN/* SCHEMANAME = The DB schema in which to make changes TABLENAME = The table with partitions to potentially delete PARTITIONNAME = The name of the partition to create *//* Verify that the partition does not already exist */DECLARE RETROWS INT; SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_description >= CLOCK; IF RETROWS = 0 THEN/* 1. Print a message indicating that a partition was created. 2. Create the SQL to create the partition. 3. Execute the SQL from #2. */SELECT CONCAT( "partition_create(", SCHEMANAME, ",", TABLENAME, ",", PARTITIONNAME, ",", CLOCK, ")" ) AS msg; SET @SQL = CONCAT( 'ALTER TABLE ', SCHEMANAME, '.', TABLENAME, ' ADD PARTITION (PARTITION ', PARTITIONNAME, ' VALUES LESS THAN (', CLOCK, '));' ); PREPARE STMT FROM @SQL; EXECUTE STMT; DEALLOCATE PREPARE STMT; END IF; END$$ DELIMITER ; DELIMITER $$ CREATE PROCEDURE `partition_drop`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), DELETE_BELOW_PARTITION_DATE BIGINT)BEGIN/* SCHEMANAME = The DB schema in which to make changes TABLENAME = The table with partitions to potentially delete DELETE_BELOW_PARTITION_DATE = Delete any partitions with names that are dates older than this one (yyyy-mm-dd) */DECLARE done INT DEFAULT FALSE; DECLARE drop_part_name VARCHAR(16); /* Get a list of all the partitions that are older than the date in DELETE_BELOW_PARTITION_DATE. All partitions are prefixed with a "p", so use SUBSTRING TO get rid of that character. */DECLARE myCursor CURSOR FOR SELECT partition_name FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND CAST(SUBSTRING(partition_name FROM 2) AS UNSIGNED) < DELETE_BELOW_PARTITION_DATE; DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE; /* Create the basics for when we need to drop the partition. Also, create @drop_partitions to hold a comma-delimited list of all partitions that should be deleted. */SET @alter_header = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " DROP PARTITION "); SET @drop_partitions = ""; /* Start looping through all the partitions that are too old. */OPEN myCursor; read_loop: LOOP FETCH myCursor INTO drop_part_name; IF done THEN LEAVE read_loop; END IF; SET @drop_partitions = IF(@drop_partitions = "", drop_part_name, CONCAT(@drop_partitions, ",", drop_part_name)); END LOOP; IF @drop_partitions != "" THEN/* 1. Build the SQL to drop all the necessary partitions. 2. Run the SQL to drop the partitions. 3. Print out the table partitions that were deleted. */SET @full_sql = CONCAT(@alter_header, @drop_partitions, ";"); PREPARE STMT FROM @full_sql; EXECUTE STMT; DEALLOCATE PREPARE STMT; SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, @drop_partitions AS `partitions_deleted`; ELSE/* No partitions are being deleted, so print out "N/A" (Not applicable) to indicate that no changes were made. */SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, "N/A" AS `partitions_deleted`; END IF; END$$ DELIMITER ; DELIMITER $$ CREATE PROCEDURE `partition_maintenance`(SCHEMA_NAME VARCHAR(32), TABLE_NAME VARCHAR(32), KEEP_DATA_DAYS INT, HOURLY_INTERVAL INT, CREATE_NEXT_INTERVALS INT) BEGIN DECLARE OLDER_THAN_PARTITION_DATE VARCHAR(16); DECLARE PARTITION_NAME VARCHAR(16); DECLARE OLD_PARTITION_NAME VARCHAR(16); DECLARE LESS_THAN_TIMESTAMP INT; DECLARE CUR_TIME INT; CALL partition_verify(SCHEMA_NAME, TABLE_NAME, HOURLY_INTERVAL); SET CUR_TIME = UNIX_TIMESTAMP(DATE_FORMAT(NOW(), '%Y-%m-%d 00:00:00')); SET @__interval = 1; create_loop: LOOP IF @__interval > CREATE_NEXT_INTERVALS THEN LEAVE create_loop; END IF; SET LESS_THAN_TIMESTAMP = CUR_TIME + (HOURLY_INTERVAL * @__interval * 3600); SET PARTITION_NAME = FROM_UNIXTIME(CUR_TIME + HOURLY_INTERVAL * (@__interval – 1) * 3600, 'p%Y%m%d%H00'); IF(PARTITION_NAME != OLD_PARTITION_NAME) THEN CALL partition_create(SCHEMA_NAME, TABLE_NAME, PARTITION_NAME, LESS_THAN_TIMESTAMP); END IF; SET @__interval=@__interval+1; SET OLD_PARTITION_NAME = PARTITION_NAME; END LOOP; SET OLDER_THAN_PARTITION_DATE=DATE_FORMAT(DATE_SUB(NOW(), INTERVAL KEEP_DATA_DAYS DAY), '%Y%m%d0000'); CALL partition_drop(SCHEMA_NAME, TABLE_NAME, OLDER_THAN_PARTITION_DATE); END$$ DELIMITER ; DELIMITER $$ CREATE PROCEDURE `partition_verify`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), HOURLYINTERVAL INT(11)) BEGIN DECLARE PARTITION_NAME VARCHAR(16); DECLARE RETROWS INT(11); DECLARE FUTURE_TIMESTAMP TIMESTAMP; /* * Check if any partitions exist for the given SCHEMANAME.TABLENAME. */ SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_name IS NULL; /* * If partitions do not exist, go ahead and partition the table */ IF RETROWS = 1 THEN /* * Take the current date at 00:00:00 and add HOURLYINTERVAL to it. This is the timestamp below which we will store values. * We begin partitioning based on the beginning of a day. This is because we don't want to generate a random partition * that won't necessarily fall in line with the desired partition naming (ie: if the hour interval is 24 hours, we could * end up creating a partition now named "p201403270600" when all other partitions will be like "p201403280000"). */ SET FUTURE_TIMESTAMP = TIMESTAMPADD(HOUR, HOURLYINTERVAL, CONCAT(CURDATE(), " ", '00:00:00')); SET PARTITION_NAME = DATE_FORMAT(CURDATE(), 'p%Y%m%d%H00'); — Create the partitioning query SET @__PARTITION_SQL = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " PARTITION BY RANGE(`clock`)"); SET @__PARTITION_SQL = CONCAT(@__PARTITION_SQL, "(PARTITION ", PARTITION_NAME, " VALUES LESS THAN (", UNIX_TIMESTAMP(FUTURE_TIMESTAMP), "));"); — Run the partitioning query PREPARE STMT FROM @__PARTITION_SQL; EXECUTE STMT; DEALLOCATE PREPARE STMT; END IF; END$$ DELIMITER ;存储过程的使用:
存储过程如果单独使用:CALL partition_maintenance(zabbix, ‘history_uint’, 31, 24, 14); 解释:history_uint表最多保存31天的数据,每隔24小时生成一个分区,这次一共生成14个分区 可以使用一个存储过程来实现7张表的分区:
DELIMITER $$CREATE PROCEDURE `partition_maintenance_all`(SCHEMA_NAME VARCHAR(32))BEGIN CALL partition_maintenance(SCHEMA_NAME, 'history', 31, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'history_log', 31, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'history_str', 31, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'history_text', 31, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'history_uint', 31, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'trends', 180, 24, 14); CALL partition_maintenance(SCHEMA_NAME, 'trends_uint', 180, 24, 14);END$$DELIMITER ;01 01 * /opt/software/mysql/bin/mysql -uzabbix -pzabbix zabbix -e “CALL partition_maintenance_all(‘zabbix’);”
原创:graysky
|