nagios安装配置
来自：网络第一步：安装软件：分为nagios监控端和nagios被监控端监控端软件列表uploads/img/201511/05030030_5Yxe.jpgNagios安装包uploads/img/201511/05030030_tg29.jpgNagios插件安装包uploads/img/201511/05030030_SXjZ.jpgNagios中文支持包uploads/img/201511/05030030_T7ZK.jpgNrpe软件包uploads/img/201511/05030030_TvLO.jpgnagios通过nrpe来远端管理服务1. nagios执行安装在它里面的check_nrpe 插件，并告诉check_nrpe 去检测哪些服务。 nagios培训2. 通过ssl，check_nrpe 连接远端机子上的nrpe daemon3. nrpe运行本地的各种插件去检测本地的服务和状态4. nrpe把检测的结果传给主机端的check_nrpe， 主机端的check_nrpe再把结果送到nagios状态队列中。5. nagios 依次读取队列中的信息，再把结果显示出来。解决编译软件时需要的依赖@www ~]# yum install -y gcc glibc glibc-common gd gd-devel xinetd openssl-devel添加nagios用户添加目录 mkdir /usr/local/nagios修改权限 chown -R nagios.nagios /usr/local/nagios解压软件包 tar -xzvf nagios-3.2.0.tar.gz开始安装1. ./configure --prefix=/usr/local/nagios2. make all3. make install4. make install-init5. make install-commandmode6. make install-config7. chkconfig --add nagios8. chkconfig --level 35 nagios on9. tar -xzvf nagios-plugins-1.4.14.tar.gz10. ./configure --prefix=/usr/local/nagios11. make && make install12. yum install httpd13. yum install php14. vim /etc/httpd/conf/httpd.conf添加以下内容uploads/img/201511/05030030_VizB.jpg修改用户uploads/img/201511/05030030_rUum.jpg15. 添加密码htpasswd -c /usr/local/nagios/etc/htpasswd oracle16. /etc/init.d/httpd start17. tar -xjvf nagios-cn-3.2.0.tar.bz218. ./configure 19. make && make install监控端nagios安装完毕重启httpd和启动nagios可以看到以下画面uploads/img/201511/05030030_DmRk.jpg这里你要输入刚才设置的用户和密码
在没有修改配置的情况下，默认只能查看到本机uploads/img/201511/05030031_Eehy.jpg好的 下面来添加主机会用到以下几个文件，其他文件就由各位下去自己慢慢研究了，我手懒uploads/img/201511/05030031_Lnd6.jpg其中以下两个文件需要手动创建uploads/img/201511/05030031_8PXl.jpg定义被监控主机@www objects]# cat hosts.cfgdefine host{ use linux-server 使用templates.cfg定义的 host_name Nagios-Linux 自己取的名字并不一定是主机名 alias Nagios-Linux 别名 address 192.168.1.201被监控主机 }定义监控内容也就是监控命令@www objects]# cat services.cfgdefine service{ use local-service host_name Nagios-Linux service_description Current Load check_command check_nrpe!check_load }define service{ use local-service host_name Nagios-Linux service_description Check Disk sda1 check_command check_nrpe!check_sda1 }define service{ use local-service host_name Nagios-Linux service_description Total Processes check_command check_nrpe!check_total_procs nagios实施 }define service{ use local-service host_name Nagios-Linux service_description Current Users check_command check_nrpe!check_users }define service{ use local-service host_name Nagios-Linux service_description Check Zombie Procs check_command check_nrpe!check_zombie_procs }define service{ use local-service host_name Nagios-Linux service_description Check Swap check_command check_nrpe!check_swap }define service{ use local-service host_name Nagios-Linux service_description HTTP check_command check_nrpe!check_http }define service{ use local-service host_name Nagios-Linux service_description MYSQL check_command check_nrpe!check_mysql }define service{ use local-service host_name Nagios-Linux service_description MYLOG check_command check_nrpe!check_mylog被监控端主机安装nrep、nagi-plugin软件包与监控端安装类似，注意最好是以xinetd的方式来启动安装nrep161./configure162make all163make install-plugin164make install-daemon-config165make install-xinetdvim /etc/xinetd.d/nrpe# default: on# description: NRPE (Nagios Remote Plugin Executor)service nrpe{ flags = REUSE socket_type = stream port = 5666 wait = no user = nagios group = nagios server = /usr/local/nagios/bin/nrpe server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd log_on_failure+= USERID disable = no only_from = 127.0.0.1 192.168.1.200#服务器地址测试/usr/local/nagios/libexec/check_nrpe -H localhost@www libexec]# vim /usr/local/nagios/etc/nrpe.cfglog_facility=daemonpid_file=/var/run/nrpe.pidserver_port=5666nrpe_user=nagiosnrpe_group=nagiosallowed_hosts=127.0.0.1dont_blame_nrpe=0debug=0command_timeout=60connection_timeout=300command=/usr/local/nagios/libexec/check_users -w 5 -c 10command=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20command=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sda1command=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Zcommand=/usr/local/nagios/libexec/check_procs -w 150 -c 200command=/usr/local/nagios/libexec/check_swap -w 20% -c 10%command=/usr/local/nagios/libexec/check_http -I 127.0.0.1command=/usr/local/nagios/libexec/check_mysqlcommand=/usr/local/nagios/libexec/check_mylog自己定义的插件@www libexec]# cat check_mylog#!/bin/bash##myfiles="`date +%F`.txt"count=`sed -n '/fail/p' /tmp/$myfiles|wc -l`if [ $count -eq 0 ];then echo "MYLOG IS OK" exit 0elif [ $count -ge 1 -a $count -le 10 ] ;then echo "MYLOG IS WARNING" exit 1elif [ $count -ge 11 ];then echo "MYLOG IS CRITICAL" exit 2elif [ $count -lt 0 ];then echo "UNKNOWN" exit 3If0 表示OK1 表示WARNNING2 表示 CRITICAL3 表示UNKNOWN在服务端的services.cfg中使用这两个自己定义的插件 监控软件define service{ use local-service host_name Nagios-Linux service_description MYSQL check_command check_nrpe!check_mysql }define service{ use local-service host_name Nagios-Linux service_description MYLOG check_command check_nrpe!check_mylog最后要在command.cfg中加入check_nrpe命令# 'check_nrpe' command definitiondefine command{ command_name check_nrpe command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ nagios配置 }重启服务端服务uploads/img/201511/05030031_blx2.jpg就会出现我们定义的主机uploads/img/201511/05030031_cUAn.jpg例如我现在关闭mysqluploads/img/201511/05030031_YScC.jpguploads/img/201511/05030031_xVPi.jpg这里就可以看到mysql的监控状态为紧急现在恢复mysqluploads/img/201511/05030031_Zdag.jpguploads/img/201511/05030031_wvKW.jpg可以看到mysql监控状态为ok下面我来实现故障告警功能使用邮件告警# cat contacts.cfg################################################################################ CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS## Last Modified: 05-31-2007## NOTES: This config file provides you with some example contact and contact 开源监控软件# group definitions that you can reference in host and service# definitions.# # You don't need to keep these definitions in a separate file from your# other object definitions.This has been done just to make things# easier to understand.################################################################################################################################################################################################################################################ CONTACTS################################################################################################################################################################ Just one contact defined by default - the Nagios admin (that's you)# This contact definition inherits a lot of default values from the 'generic-contact'# template which is defined elsewhere.define contact{ contact_name nagiosadmin use generic-contact alias Nagios Admin
service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email host_notification_commands notify-host-by-email email 15882026924@139.com ; }################################################################################################################################################################ CONTACT GROUPS################################################################################################################################################################ We only have one contact in this simple configuration file, so there is# no need to create more than one contact group.define contactgroup{ contactgroup_name admins alias Nagios Administrators members nagiosadmin }# tail -20 services.cfg }define service{ use local-service host_name Nagios-Linux service_description HTTP check_command check_nrpe!check_http nagios安装 }define service{ use local-service host_name Nagios-Linux service_description MYSQL check_command check_nrpe!check_mysql contact_groups admins }define service{ use local-service host_name Nagios-Linux service_description MYLOG check_command check_nrpe!check_mylog }Cat command.cfg# 'notify-host-by-email' command definitiondefine command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ }# 'notify-service-by-email' command definitiondefine command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ }默认是配置好了这里就不用配置直接在contact和services中使用就好了把mysql停了uploads/img/201511/05030032_cpxO.jpg
验证成功，但是要注意需要把发件人的地址设置为白名单才可以收到uploads/img/201511/05030032_dWR4.jpg由于是手机邮件就实现了邮件短信同时提醒的功能，当然有邮件达到短信提醒的邮箱都能实现这个功能不一定是手机邮箱
想做Nagios， Zabbix,Cacti,iTop各种交流的，可以进入开源监控工具Nagios交流QQ群号 ：476809427
页:
[1]